Saturday, 4 April 2015

How you can plaster over Artex


How you can plaster over Artex: Artex is a slim coating of difficult plaster that is used like a decorative treatment with regard to walls and ceiling. It can be left like a roughened surface or even formed into swirls or other designs. It was often used within older houses in order to disguise a damaged or stained roof. Removing Artex is actually laborious work however luckily it can frequently be hidden having a thin coat of recent smooth plaster.

How you can plaster over Artex

Artex and other textured surface finishes were very popular within our homes up until a couple of years ago. And that simply leaves us with the issue of what to do with this now it is no longer popular.


Preparation Protect your own floor by setting up plenty of polythene sheets.


If you know your plaster does not contain the product, then you can chip away any high places. If your old Artex has asbestos inside it, you should get in a expert to do the job for you personally.

Wash off the most severe of any muck or dust within the Artex with a cloth or sponge and hot water and soap and allow to dry.

Using the adhesive

Use a generous coating of PVA adhesive/sealant to the wall or even ceiling. This should become mixed one component PVA to 4 parts water.

Clean on and leave to dry up. This will make the brand new coat of plaster stick to the surface.

Suggestion: Turn off the power provide and unscrew any kind of ceiling light fixtures. Wrap them with much more polythene to keep all of them clean and dried out.

Applying the plaster

Apply a thin (3mm or 0. 1in) coat of DO-IT-YOURSELF finishing plaster on the Artex with a plaster's trowel and hawk, keeping it as sleek as possible.

Tip: Move the mixed plaster to a carrying panel so that you can hold this close the walls or ceiling while you work.

Once the plaster has begun in order to harden (check the actual tub instructions) damp the surface with a flower sprayer filled with thoroughly clean water and make use of the trowel at a minor angle to give the surface area a final smoothing.

Suggestion getting a good complete on skim plaster can be challenging. You might like to practice first, and even enroll on a filling course.

Safety suggestion

Old Artex films may contain the product. Never sand or even chip away the actual coating as this might release particles in to the air. If within doubt, contact your local authorities or the product or Artex elimination specialist.

How to find good plastering company, just go to google.co.uk
Type :



And result will list you most suitable companies for your consideration.

No comments:

Post a Comment